Carrier Tape Technical Guides

These guides cover the decisions that determine whether carrier tape runs reliably on a packaging line: which machine platform suits which tape and volume, how the material grade changes the process window, what EIA-481 actually requires, and how to measure the result. Each guide links to the deeper technical articles and to the equipment pages it refers to.

Equipment and machine selection

• Carrier Tape Forming Machines: How to Choose the Right Platform — flat-plate or roller, single or dual lane, and how tape width and volume decide the answer.
• Flat-Plate Carrier Tape Forming Machines — how flat-plate forming works, where it holds tolerance best, and the changeover advantages.
• Roller-Type Carrier Tape Forming Machines — continuous forming for high volume, and what it demands from material and maintenance.
• Carrier Tape Punching Dies — die clearance, sprocket hole position, burr direction, tool steel choice and sharpening intervals.
• Carrier Tape Forming Machine Price — what drives the cost of a machine, and the costs that appear after delivery.
• Custom Carrier Tape Equipment — what can be customised, how a custom project runs, and how to write acceptance criteria.

Приложения

• Carrier Tape for SMT Assembly Lines — feeder compatibility, pitch stability and the tape-to-line interface.
• Carrier Tape for Semiconductor and IC Packaging — fine pitch, low warpage and tighter pocket control for IC and module packaging.
• Carrier Tape for LED Packaging — small pockets, anti-static grades and high-volume LED tape production.

Materials

• Carrier Tape Materials: PC, PS and PET — how the three grades differ in forming behaviour, transparency and cost.
• Polycarbonate (PC) Carrier Tape — dimensional stability, high-temperature tolerance and where PC is worth the premium.
• Polystyrene (PS) Carrier Tape — the volume workhorse: forming window, anti-static grades and process settings.

Standards and quality

• EIA-481 Carrier Tape Tolerances Explained — sprocket pitch, cumulative tolerance and pocket clearance, and how compliance is verified.
• Carrier Tape Inspection and Testing — the measurement set, vision inspection, peel force, ESD and a sampling plan that holds up in audits.

Where to start

If you are evaluating equipment, start with the platform selection guide and then check the cost drivers. If you have a tape that is failing on a line, start from the inspection page to establish which characteristic is out, then use the defect diagnosis guide or the punching die troubleshooting article. For a specific tape geometry, send the drawing through the contact page.