Single-Lane Carrier Tape Forming Machine – Compact Design for Small-Batch & Prototype Production

Precision forming for R&D, pilot runs, and low-volume electronics packaging

---

Введение

The Jenten Single-Lane (1-to-1) Carrier Tape Forming Machine is purpose-built for manufacturers who require precision carrier tape production without the throughput capacity of multi-lane systems. Designed for R&D laboratories, pilot production lines, and small-to-medium volume manufacturing environments, this compact forming solution delivers the same micron-level accuracy as our high-speed multi-lane machines — but in a smaller footprint with simplified changeover procedures.

In the electronics packaging industry, carrier tape — a precision-engineered thermoplastic strip with evenly spaced pockets (cavities) for holding electronic components — is essential for protecting components during storage, shipping, and automated SMT assembly . The pockets must meet exacting dimensional standards to ensure reliable component pick-up by automated placement equipment.

The Single-Lane configuration offers distinct advantages for customers who prioritize flexibility, rapid material changeover, and space efficiency over maximum production volume. Typical applications include:

• Prototype development — Testing new pocket geometries before committing to high-volume tooling
• Small-batch production — Serving niche or specialty component manufacturers
• Material trials — Evaluating new resin formulations without consuming large quantities of material
• On-demand manufacturing — Producing exactly the quantity required, eliminating waste from minimum order quantities

---

What Makes the Single-Lane Configuration Unique

Unlike multi-lane systems that process four or six tape lanes simultaneously, the Single-Lane machine processes one tape lane at a time. This configuration provides several operational advantages:

Особенность	Преимущество
Simplified changeover	Faster transition between different tape widths and pocket specifications
Reduced material waste	Minimal setup scrap — only one lane requires adjustment
Lower power consumption	Reduced energy usage compared to larger multi-lane systems
Compact footprint	Smaller machine dimensions, ideal for limited floor space
Easier maintenance	Single-lane design simplifies access to all processing stations
Cost-effective entry	Lower initial investment while maintaining full production capability

For electronics manufacturers who do not require the high-volume output of multi-lane machines, the Single-Lane configuration offers an ideal balance of capability and cost.

---

Полный процесс формовки

The Jenten Single-Lane Carrier Tape Forming Machine integrates multiple processing stations into a single, continuous production line. The following section describes each stage of the forming process, highlighting the engineering principles that ensure consistent, high-quality output.

1. Подготовка и подача материала

The forming process begins with feeding a thermoplastic sheet (typically PC, PS, or PET) into the machine. Material quality is critical to final product consistency.

Основные особенности системы подачи ключей:

• Stable material payout — The feeding mechanism delivers consistent material advancement, preventing stretching or deformation that could affect pocket dimensions. As noted in industry literature, proper tape feeding control is essential for achieving micron-level positioning accuracy .
• Регулируемый контроль натяжения — Operators can fine-tune material tension to accommodate different material types and thicknesses. Proper tension ensures the sheet conforms perfectly to the forming mold, critical for maintaining consistent pocket depth and shape.

Material compatibility:
The machine accommodates standard carrier tape materials including:

• PC (Polycarbonate) — High impact strength, excellent dimensional stability, transparency; widely used for high-reliability components
• PS (Polystyrene) — Cost-effective, good formability; suitable for general-purpose SMT components
• PET (Polyethylene Terephthalate) — Good heat resistance and dimensional stability for specialized applications

For PC and PS sheet materials, recommended thickness ranges from 0.2mm to 0.5mm, with tape widths typically from 8mm to 24mm .

2. Предварительный нагрев

Before entering the forming station, the tape is heated to its softening temperature — the point at which the material becomes pliable enough to take the pocket shape without cracking. Preheating serves multiple purposes:

• Удаление влаги — Eliminates surface moisture that could cause bubbles or poor forming quality
• Temperature stabilization — Ensures uniform heat distribution across the tape width
• Process control — Allows precise adjustment of forming temperature for different materials and thicknesses

Typical forming temperatures range from 120°C to 300°C, depending on the material specification . The machine’s temperature control system maintains consistent heating across the entire tape width, ensuring uniform pocket formation.

3. Формирование карманов

The heart of the carrier tape manufacturing process is the forming station, where the heated tape is pressed into a series of pockets that will hold individual electronic components.

Варианты методов формовки:

For the Single-Lane configuration, Jenten offers both flat-plate (intermittent) and roller-type (rotary) forming options, depending on the specific production requirements:

Метод формования	Характеристики	Наиболее подходит для
Плоскопанельная (прерывистая)	Tape is pressed between heated flat plates with concave cavities; slower production speed but excellent for deeper pockets and thicker materials	Prototype runs, thick materials, deep cavity requirements
Роликовый (вращающийся)	Лента проходит над вращающимся барабаном с выпуклыми формами; непрерывное высокоскоростное производство	Small-batch production, consistent shallow-to-medium depth pockets

The forming station creates pockets with the specified internal dimensions, ensuring they are:

• Последовательность в глубине — The pocket depth (K0) must be precisely controlled to accommodate the target component
• Гладкие внутренние поверхности — Предотвращает повреждение компонентов при установке
• Точное позиционирование — Pocket pitch must meet EIA-481-D standards for compatibility with automated SMT equipment

4. Точная штамповка

After pocket forming, the tape moves to the punching station. Here, sprocket holes (index holes) are created along the tape edge(s). These holes engage with the sprocket wheels of automated SMT placement machines, ensuring accurate positioning during component pick-up.

Critical punching quality parameters:

Параметр	Importance
Точность шага P2	±0.03mm or better — ensures smooth feeding through SMT machines
Качество отверстий	Clean edges, no burrs — prevents dust generation and feeder jams
Hole diameter	Consistent with EIA-481-D specifications for the tape width

Modern carrier tape forming machines may incorporate integrated inspection systems that use cameras to verify punching quality during production. As described in a patent for carrier tape forming equipment, “the punching detection device includes a camera that shoots the carrier tape, transmits image information to a host, and the host conducts detection” . This capability allows real-time quality monitoring without interrupting production.

5. Slitting (For Multi-Lane Systems)

For the Single-Lane configuration, slitting is generally not required as the machine processes only one lane. This eliminates an additional processing step and simplifies the machine design.

For applications that require cutting the tape to a specific width, the machine can be equipped with a precision slitting blade to trim the tape edges to the required dimensions.

6. Контроль качества

Quality inspection is not an afterthought — it is integral to the forming process. The Single-Lane machine can be equipped with an Automatic Optical Inspection (AOI) system that monitors:

• Точность размеров — Pocket depth, width, and pitch
• Дефекты поверхности — Царапины, загрязнения или дефекты
• Качество отверстий — Correct diameter, clean edges, proper positioning

Inspection data can be collected for statistical process control (SPC) and CPK analysis, providing documented quality assurance for customers.

7. Перемотка и упаковка

The final step is winding the finished carrier tape onto reels, ready for shipment to the customer. The rewinding station is designed to maintain consistent tension throughout the winding process — preventing telescoping (the tape layers shifting sideways), wrinkling, or damage to the formed pockets.

Функции перемотки:

• Регулируемый контроль натяжения — Prevents over-tensioning that could deform pockets
• Чистая обмотка — Ensures the tape layers are aligned and evenly distributed
• Совместимость катушек — Подходит для стандартных катушек указанной ширины ленты

---

Технические характеристики (предварительные — детали будут уточнены)

Note: The following specifications are provided as a reference based on industry standards for single-lane carrier tape forming systems . Final specifications will be confirmed upon equipment customization.

Параметр	Технические характеристики
Ширина ленты	8 мм – 24 мм (стандартный)
Толщина материала	0,2 мм – 0,5 мм
Подходящие материалы	ПК, ПС, ПЭТ
Метод формования	Flat-Plate (Intermittent) or Roller-Type (Rotary)
Максимальная глубина кармана (K0)	≤ 2,8 мм
Скорость производства	(Будет указано позже)
Стандарт точности	EIA-481-D
Источник питания	220 В / 380 В, 50/60 Гц (по указанию заказчика)
Потребляемая мощность	(Будет указано позже)
Габаритные размеры станка	(Будет указано позже)
Вес машины	(Будет указано позже)

---

Why Choose the Jenten Single-Lane Configuration?

1. Flexibility Without Compromise

The Single-Lane configuration offers the flexibility that multi-lane systems cannot match. Changeovers between different tape widths and pocket specifications are faster and require less material waste, making it an ideal solution for:

• Multiple product lines — Run different tape geometries on the same machine
• Prototype development — Test new designs without committing to high-volume tooling
• Just-in-time production — Produce exactly what is needed, when it is needed

2. Precision Engineering

Jenten equipment is built with precision as the foundation. Every component — from the feeding system to the forming station to the punching unit — is engineered to deliver consistent, micron-level accuracy that meets or exceeds EIA-481-D standards.

3. Cost-Effective Entry

For manufacturers entering the carrier tape production market or expanding their capabilities, the Single-Lane machine provides a cost-effective entry point without sacrificing quality or capability.

4. Responsive Support

Компания Jenten предоставляет комплексную поддержку клиентов, включая:

• Консультация перед покупкой — Assisting with application selection and configuration
• Монтаж и ввод в эксплуатацию — Ensuring smooth equipment startup
• Обучение операторов — Building in-house expertise
• Наличие запасных частей — Minimizing downtime
• Техническая поддержка — Continuous assistance for production challenges

---

Приложения

The Jenten Single-Lane Carrier Tape Forming Machine serves a variety of manufacturing sectors:

• Упаковка полупроводников и интегральных схем — Precision carrier tape for IC components, where pocket accuracy is critical for automated assembly
• Производство поверхностного монтажа — Producing tapes compatible with high-speed pick-and-place equipment
• Сборка светодиодных модулей — Specialized carrier tape for LED components with specific pocket depth requirements
• Производство бытовой электроники — Small-batch production for component suppliers with diverse product lines
• Автомобильная электроника — Niche and specialty component packaging requiring high reliability

---

Заключение

The Jenten Single-Lane Carrier Tape Forming Machine delivers the precision and reliability of larger multi-lane systems in a compact, flexible configuration. Designed for R&D, pilot production, and small-to-medium volume manufacturing, it offers an ideal solution for manufacturers who prioritize flexibility, rapid changeover, and space efficiency over maximum throughput.

By integrating the complete forming process — from material feeding to final rewinding — into a single machine, Jenten provides electronics manufacturers with a cost-effective entry point into carrier tape production while maintaining the quality and precision standards required by today’s semiconductor, SMT, and LED industries.

Для получения подробных технических характеристик и информации о ценах, пожалуйста, обратитесь к нашему отделу продаж. Мы с удовольствием обсудим ваши конкретные производственные требования и порекомендуем оптимальную конфигурацию для вашей задачи.

---

About Jenten: Jenten (河南金滕科技) designs and manufactures high-performance carrier tape forming equipment for the semiconductor, SMT, LED, and consumer electronics industries. Our product range includes single-lane and multi-lane carrier tape forming machines, rewinding systems, plasma cleaning equipment, and carrier tape coding solutions.

---

Следующая статья из этой серии: [Dual-Lane Carrier Tape Forming Machine Product Introduction] | [Carrier Tape Forming Technology Overview]