JT-101-5BS 전기식 열풍 건조 오븐

High-Capacity Industrial Oven with Enhanced Airflow for Carrier Tape Material Pre-Treatment

---

Introduction

The JT-101-5BS Electric Blast Drying Oven is a high-capacity industrial drying solution engineered for the pre-treatment of thermoplastic materials used in carrier tape manufacturing. Featuring a four-blower forced air circulation system, this oven delivers exceptional temperature uniformity and rapid moisture removal—critical factors for preparing PC, PS, and PET sheets before they enter the forming line.

In carrier tape production, raw material conditioning is a prerequisite for consistent forming quality. Hygroscopic thermoplastics absorb ambient moisture, and if this moisture is not removed before heating, it vaporizes during forming, creating defects that compromise pocket integrity and cause rejects. The JT-101-5BS addresses this requirement through precision temperature control and enhanced airflow that ensures uniform drying across the entire 960-liter chamber.

---

Key Technical Specifications

Parameter	Specification
Model	JT-101-5BS
Series	DHG Series Electric Blast Drying Oven
Heating Location	Rear-mounted heating (default)
Chamber Material	Stainless steel
Chamber Dimensions (H×W×D)	1000mm × 1000mm × 1000mm
Chamber Volume	960 Liters
Voltage / Power	380V / 5000W (5kW)
Temperature Range	Ambient +10°C to 300°C
Temperature Accuracy	±0.2°C
Temperature Resolution	0.1°C
Timing Range	1–999 minutes / hours, or continuous operation
Number of Blowers	4
Blower Speed Control	Yes (high/low speed adjustment)
Number of Shelves	6 shelf positions
Shelf Spacing	13 cm
Standard Shelves Included	2
Overall Dimensions (H×W×D)	1330mm × 1203mm × 1105mm

---

The Advantage of Enhanced Airflow

The JT-101-5BS is distinguished by its four-blower forced air circulation system—a design feature that provides significant advantages over standard two-blower ovens:

Feature	Benefit
Enhanced air distribution	More uniform temperature throughout the chamber
Faster moisture removal	Increased air exchange rate accelerates drying
Reduced hot spots	Better airflow prevents localized overheating
Consistent material conditioning	Every batch receives uniform treatment

In carrier tape production, moisture control is critical to forming quality. The enhanced airflow of the JT-101-5BS ensures that even dense material loads are dried uniformly, reducing the risk of defects such as bubbles, voids, and pocket deformation during subsequent forming operations.

---

Precision Engineering for Consistent Results

1. Four-Blower Air Circulation System

The defining feature of the JT-101-5BS is its four-blower design:

• Superior temperature uniformity — Consistent heating across all shelf positions
• Efficient moisture removal — Rapid air exchange carries away evaporated moisture
• Reduced drying time — Active circulation accelerates the drying process
• High/low speed adjustment — Optimizes airflow for different material types and batch sizes

2. Precise Temperature Control

The JT-101-5BS provides accurate thermal regulation with:

• ±0.2°C temperature accuracy — Maintains stable conditions throughout each drying cycle
• 0.1°C temperature resolution — Fine adjustment capability for sensitive materials
• Wide operating range — Ambient +10°C to 300°C accommodates all common carrier tape materials
• Digital control — Microprocessor-based temperature regulation

3. Large-Capacity Chamber

The 960-liter chamber with 1000mm × 1000mm × 1000mm internal dimensions provides:

• Ample processing capacity — Supports continuous production lines
• Flexible loading — Six shelf positions with 13cm spacing
• Stainless steel construction — Prevents contamination of sensitive materials

4. Flexible Operation

The oven supports multiple operational modes:

• Timed operation — 1–999 minutes or hours
• Continuous operation — For uninterrupted production
• High/low blower speed — Adjustable airflow
• Rear-mounted heating — Efficient heat distribution

---

Applications in Carrier Tape Production

• High-volume raw material drying (pre-forming) — PC, PS, and PET sheets
• Moisture removal for quality-critical materials — Especially important for materials that have been stored for extended periods
• Pre-heating for forming lines — Consistent material temperature for uninterrupted production
• Batch processing — Uniform drying across full material lots

---

Why Choose the JT-101-5BS?

1. Superior Airflow

Four blowers provide enhanced temperature uniformity and faster moisture removal compared to standard two-blower ovens.

2. High Capacity

With 960 liters of chamber volume, the oven processes substantial material batches, supporting high-volume production.

3. Precise Control

±0.2°C accuracy and 0.1°C resolution ensure consistent material conditioning.

4. Flexible Configuration

6 shelf positions, 2 standard shelves, and continuous or timed operation adapt to different production requirements.

5. Durable Construction

The stainless steel chamber ensures long service life and prevents material contamination.

---

Conclusion

The JT-101-5BS Electric Blast Drying Oven delivers superior drying performance through its enhanced four-blower airflow system and precise temperature control. By ensuring uniform drying across every batch, this oven supports carrier tape production that meets the dimensional accuracy required by EIA-481-D standards.

For detailed technical specifications and pricing information, please contact our sales team.