---

JT-M-006 Mesin Pembentuk Pita Pembawa Pelat Datar dengan Presisi Sangat Tinggi

High-Stability Forming System with Guide-Pin/Bushing Design for Superior Precision

---

Introduction

The JT-M-006 Ultra-High-Precision Flat-Plate Carrier Tape Forming Machine is engineered for manufacturers who demand the highest levels of dimensional stability and forming precision available in flat-plate carrier tape production. This model introduces guide-pin and bushing (guide post and guide bush) design on the heating, forming, and punching modules—significantly enhancing the straight-line motion stability and flatness of critical forming operations.

In carrier tape production, dimensional consistency directly impacts SMT placement efficiency and component protection. The JT-M-006 addresses this requirement through precision engineering that delivers ±0.002mm feeding repeat accuracy coupled with enhanced mechanical stability—ensuring that every pocket is formed to exact specifications across the full production run.

Typical applications include:

• Ultra-high-precision semiconductor packaging — Critical IC components requiring the highest dimensional stability
• Wide-format carrier tape production — Supporting tape widths from 12mm to 120mm with partial 8mm 1-to-2 capability
• Deep-cavity component packaging — Capable of forming pockets up to 25mm depth
• High-volume, high-stability production — Production speeds of 200–380 meters/hour with consistent quality
• Applications requiring documented process stability — CPK analysis and process capability documentation

---

What Makes the JT-M-006 Unique

The JT-M-006’s defining feature is its guide-pin and bushing (guide post and guide bush) design on the heating, forming, and punching modules. This precision guidance system ensures:

• Superior flatness — The upper and lower modules remain perfectly parallel during operation
• Enhanced stability — Straight-line motion is maintained under all operating conditions
• Reduced wear — Precision guide pins and bushings minimize lateral movement that causes uneven wear

Feature	JT-M-005	JT-M-006 (Ultra-Stability)
Module Guidance	Standard linear guides	Guide-pin + bushing on heating/forming/punching modules
Feeding Technology	Magnetic levitation linear motor	Magnetic levitation linear motor
Feeding Repeat Accuracy	±0.002mm	±0.002mm
Production Speed	200–380 M	200–380 M
Module Surface Finish	Full steel with chrome plating	Full steel with chrome plating

The guide-pin/bushing design is a precision engineering approach commonly found in high-end forming equipment. Unlike standard linear guides that allow slight lateral movement, guide pins and bushings constrain motion to a single axis—ensuring that the upper and lower modules close with perfect alignment every cycle.

Important note: This design achieves superior flatness and stability but places high precision requirements on the molds themselves. The benefits of the guide-pin/bushing system are fully realized only when paired with high-precision tooling.

---

Key Technical Specifications

Parameter	Specification
Tape Width (W)	12mm – 120mm (partial 8mm 1-to-2 capability)
Max. Pocket Depth (K0)	25mm
Production Speed	200 – 380 meters/hour
Forming Methods	Air blow forming, male mold forming, assisted forming, reverse blow forming
Feeding System	CRK High-Precision Magnetic Levitation Linear Motor
Feeding Repeat Accuracy	±0.002mm
Punching System	Panasonic 750W servo motor + CRK-80 electric cylinder
Punching Repeat Accuracy	±0.01mm
Optical Readout Accuracy	±0.005mm (forming & punching modules)
Module Guidance	Guide-pin + bushing design on heating, forming, and punching modules
Positioning System	High-precision linear guides (X-Y) with adjustable slope
Punching Feature	Pulley positioning / punch correction device for consistent edge holes
Track Feature	Cylinder pusher ensures tape stability during heating/forming (F-value stability)
Module Surface Finish	Full steel with chrome plating
Control System	Mitsubishi PLC + Weintek HMI
Applicable Materials	PS, PET, PC (conductive and non-conductive)

---

Precision Engineering for Maximum Stability

1. Guide-Pin and Bushing Module Design

The defining feature of the JT-M-006 is its precision module guidance system:

How It Works:

Guide pins (precision-ground cylindrical shafts) and bushings (precision-ground sleeves) are installed on the heating, forming, and punching modules. As the modules close during each production cycle, the pins engage with the bushings—ensuring that the upper and lower modules maintain perfect alignment.

Benefits of the Guide-Pin/Bushing System:

Benefit	Explanation
Superior flatness	Modules remain perfectly parallel throughout the entire stroke
Enhanced stability	Straight-line motion is guaranteed with minimal lateral deviation
Reduced wear	Precise guidance prevents uneven loading on guides and bearings
Consistent quality	Every cycle delivers identical forming pressure and alignment
Long-term precision	Wear is distributed evenly, maintaining accuracy over time

Design Considerations:

The guide-pin/bushing approach is commonly used in high-precision forming applications where dimensional consistency is critical. This design provides:

• Better flatness compared to standard guide systems
• Superior stability for long production runs
• Higher precision requirements for the molds themselves

This means that the JT-M-006 is optimized for manufacturers who use high-precision tooling and require the maximum stability that flat-plate forming can provide.

2. Magnetic Levitation Linear Motor Feeding System

The JT-M-006 features advanced magnetic levitation technology:

• ±0.002mm repeat accuracy — A 10× improvement over conventional servo-driven systems
• Contactless operation — No mechanical wear, no backlash, no friction
• Digital stroke adjustment — Operator inputs stroke length directly through the HMI
• High-speed capability — Supports production speeds of up to 380 meters/hour

3. Precision Servo-Controlled Punching System

The punching system features a Panasonic 750W servo motor paired with a CRK-80 electric cylinder:

Feature	Benefit
Servo-controlled speed	Punching speed adjustable through HMI
Digital depth control	Punching depth set via touchscreen
±0.01mm repeat accuracy	Consistent hole quality across all production runs
Fast setup	Parameters changed in seconds, not minutes

The punching module also features a pulley positioning or punch correction device that ensures edge holes remain consistently accurate throughout the production run.

4. Track Stabilization System

The cylinder pusher system on the track ensures the tape remains stable during heating and forming:

• Purpose: Eliminates tape movement during critical forming phases
• Benefit: Guarantees the stability of the F value—a critical dimension for SMT compatibility
• Mechanism: Cylinder pusher provides consistent pressure without operator intervention

5. High-Precision Optical Digital Readout

Both the forming and punching modules are equipped with a high-precision optical digital readout system with ±0.005mm accuracy:

• Real-time visual feedback — Operators see displacement values when adjusting P2 and F values
• One-step positioning — Eliminates trial-and-error adjustments
• Reduced setup time — Critical for manufacturers with frequent changeovers

6. Superior Component Quality

Component	Specification
PLC	Mitsubishi (Japan)
HMI	Weintek (Taiwan)
Feeding Motor	CRK High-Precision Magnetic Levitation Linear Motor
Punching Motor	Panasonic 750W servo (Japan)
Punching Actuator	CRK-80 electric cylinder
Optical System	High-Precision Digital Display (±0.005mm)
Linear Guides	High-Precision (X-Y)
Temperature Controller	Omron (Japan)
Cylinders	SMC (Japan)
Solenoid Valves	FESTO (Germany)
Power Supply	Mean Well
Relays	Schneider
Castors	FOMA (Moving/positioning integrated anti-vibration)

7. Four Forming Methods

The JT-M-006 supports four distinct forming methods:

Forming Method	Description	Best Suited For
Air Blow Forming	Compressed air forces the heated tape into the cavity	Thin materials, shallow pockets
Male Mold Forming	A convex mold presses the tape into the cavity	Deep pockets, thick materials
Assisted Forming	Combination of mechanical and air pressure forming	Complex geometries
Reverse Blow Forming	Air pressure from the reverse side assists formation	Materials with high shrinkage

8. Fully Automated Production

The JT-M-006 integrates the complete production flow:

• Automatic feeding — Magnetic levitation motor with digital stroke control
• Automatic cutting — Precision cutting of finished tape
• Automatic rewinding — Consistent tension control
• Three-mode operation — Each station can be set to “Auto,” “Manual,” or “Stop”

---

Industry Standards and Performance

The JT-M-006 is designed to meet EIA-481-D specifications for embossed carrier taping of surface-mount components.

With its combination of magnetic levitation precision (±0.002mm feeding accuracy) and guide-pin/bushing stability, the JT-M-006 delivers performance at the highest tier of flat-plate carrier tape forming systems.

Key challenges in flat-plate forming include:

• Maintaining flatness — The upper and lower plates must remain parallel to ensure consistent pocket depth
• Controlling thermal expansion — Heat affects both the material and the forming tooling
• Minimizing wear — Moving parts must maintain precision over millions of cycles

The JT-M-006 addresses each of these challenges through its precision-engineered module guidance system, advanced thermal management, and high-quality components.

---

Operator-Friendly Design

The JT-M-006 is engineered for minimal operator skill requirements:

• Zero-experience friendly — Simplified setup procedures
• Digital parameter control — All critical parameters set through touchscreen HMI
• Optical positioning guidance — Visual feedback eliminates guesswork
• Quick setup — Faster changeovers than conventional mechanical systems
• Short adjustment time — Low material loss, low defect rate

---

Why Choose the JT-M-006?

1. Superior Module Stability

The guide-pin and bushing design on heating, forming, and punching modules provides:

• Better flatness than standard linear guide systems
• Superior stability under all operating conditions
• Consistent pocket depth across the full tape width
• Long-term precision through reduced wear

This stability is particularly important for wide tapes (up to 120mm) where slight variations in flatness can cause significant dimensional errors.

2. Precision Feeding

The magnetic levitation linear motor delivers ±0.002mm repeat accuracy:

• 10× better than conventional servo-driven systems
• Contactless operation — no wear, no backlash
• Digital control for quick setup and changeover

3. Wide Format Capability

With support for tape widths up to 120mm, the JT-M-006 accommodates the broadest range of applications in its class.

4. Advanced Punching System

The Panasonic servo electric cylinder provides:

• Digital speed and depth control through the HMI
• Consistent hole quality across all production runs
• Punch correction device ensures edge holes remain accurate

5. Enhanced Production Stability

The cylinder pusher track system ensures F-value stability—a critical quality parameter for wide tapes.

6. Durability and Long Service Life

All modules feature full steel construction with chrome plating, providing excellent corrosion resistance.

7. Low Defect Rate

The machine’s optimized design results in:

• Short adjustment times
• Low material loss
• Low defect rates
• Minimal customer complaints

---

Applications

• Ultra-high-precision semiconductor packaging — Critical IC components requiring maximum dimensional stability
• SMT manufacturing — Compatible with high-speed pick-and-place equipment
• LED packaging — Specialized carrier tape for LED components
• Automotive electronics — Deep-cavity packaging for sensors, connectors, and control modules
• Medical electronics — High-precision carrier tape requiring documented process stability
• Consumer electronics — Diverse product lines with varying tape specifications
• OEM/contract manufacturing — Flexible production for customers with demanding quality requirements

---

Conclusion

The JT-M-006 Ultra-High-Precision Flat-Plate Carrier Tape Forming Machine represents the pinnacle of flat-plate forming stability. With guide-pin and bushing design on all critical modules, magnetic levitation linear motor feeding (±0.002mm accuracy), and wide-format capability up to 120mm, this system delivers the dimensional consistency that demanding semiconductor, SMT, and automotive electronics manufacturers require.

For manufacturers who require the maximum stability available in a flat-plate forming system, the JT-M-006 offers performance that standard machines cannot match—backed by proven components and an operator-friendly design.

Note: The guide-pin/bushing design requires high-precision molds to achieve optimal results. Jenten can provide guidance on mold specifications and recommended tooling suppliers.

For detailed technical specifications and pricing information, please contact our sales team.

---

About Jenten: Jenten (河南金滕科技) designs and manufactures high-performance carrier tape forming equipment for the semiconductor, SMT, LED, and consumer electronics industries. Our product range includes flat-plate and roller-type carrier tape forming machines, rewinding systems, plasma cleaning equipment, and carrier tape coding solutions.

---

Next in this series: [JT-C-001 Carrier Tape Rewinding Machine] | [Comparing Flat-Plate Configurations: Which Model Is Right for You?]